Wednesday, March 1, 2017

Finally, There Is An “Eternal Storage” That Lasts For Over 1,000 Years



Do you want to be remembered for a long time? This new data storage tech can preserve information about you for as long as 1,000 years. It stores binary data in the form of metal nanodots placed on a silicon wafer, which is then sealed. The data can be read wirelessly. The researchers who created the storage tested it under artificial conditions, and it did last for a millennium.

team of Japanese researchers at the Kobe University has created, what we can call, an ‘eternal storage’ that’s capable of holding data safely for 1,000 years.

A Nikkei Technology post says the storage tech was announced at the ISSCC 2017 by the group led by Makoto Nagata and Noriyuki Miura. It involves metal nanodots placed at specific locations on a silicon wafer, arranged in a grid fashion and depicting binary 0 and 1 depending on their position.

After placing the metal nanodots on the silicon wafer, it can be sealed using an insulating material. The data present on the silicon wafer can be read without any physical interaction by wirelessly transmitting power to the wafer to access the information.
It is possible to stack multiple layers of silicon wafers, thus, increasing the amount of data per square unit of area. The team created a test chip with four recording layers using an 180nm CMOS fabrication process. It enables a density of 10 gigabits per square inch.
However, with modern fabrication processes, more memory can be stuffed. A density of 1 Tb per square inch is possible in the case of the 14nm process. That’s equivalent to the hard drives we use in our daily lives.
The researchers predict that their data storage tech can last for 1,000 years. Well, nobody would be able to live that long. But the researchers showed the real potential of their storage by creating an artificial test environment.

Using necessary pressure and stress, they were able to reduce one year of the human calendar down to an hour. So, thousand years were equivalent to 1000 hours. They were to read the data off the chip after 1000 years.
With all the excitement and fascination for the eternal storage, one thing that isn’t pleasing at the moment is the data reading speed. It is currently limited to 40Kbps. But, we can expect an increase with time, as it would be the case of the chip’s storage density.
SOURCES: FOSSBYTES

Apple To Kill Lightning Connector From Next iPhone For USB Type-C, Reports Suggest(APPLE roumor)



According to report by the Wall Street Journal, Apple might prefer the USB Type-C port for the next iPhone. However, the report is unclear and it may be pointing towards a change on the power adapter side of the iPhone Lightning cable currently featuring USB Type-A connector.


Do you want an iPhone rumor? It’s been a while, so, here is one. According to a report by the WSJ,  Apple might do away with the Lightning connector for the universal Type-C USB. Yeah, Lightning, it’s the same port that ate the 150-year-old dino audio jack on the iPhone 7.
The report says that the next iPhones will have an “USB-C port for the power cord and other peripheral devices instead of the company’s original Lightning connector.”
However, on the other hand, there can be a replacement of the USB Type-A with the newer USB Type-C on the other side of iPhone charging cable that connects to the power adapter. Just it is the case for the new MacBook adapters.
An USB-C iPhone might not be more than just a dream. Under its MFi program, Apple has already launched the Ultra Accessory Connector (UAC) that could give some satisfaction to the users having devices and accessories with both USB-C and Lightning connectors.

SOURCES: FOSSBYTES

YouTube Launches Its Own Live TV Streaming Service With 40 Channels



YouTube has launched its own live TV service called YouTube TV. Initially rolling out in the US, it’s planned to include more than 40 channels from different networks. YouTube TV would be priced at $35/mo, and users can use it on six accounts across different devices. It also includes a cloud DVR option with unlimited storage.

People might prefer streaming service, but live TV has its own place which is reserved for the TV only. Even YouTube, where people watch 1 billion hours of content every day, knows the importance.
On Tuesday, YouTube announced its live TV service. YouTube TV has more than 40 channels from leading networks including FOX, CBS, ESPN, ABC, etc. The streaming giant’s existing rental YouTube Red is also part of the YouTube TV subscription.

For $35, YouTube streams live TV on six accounts. YouTube says the live TV services would be available across various device platforms, including Chromecast. They have put the DVR on the cloud, and they are offering unlimited storage for recording multiple live TV streams which will be stored for nine months

The live TV service would first roll out at a limited number of locations in the US. Eventually, it might spread its legs across the globe. And hopefully, they would come up with a cheaper plan.
What do you think about YouTube TV? Drop your thoughts and feedback.
SOURCES: FOSSBYTES

Tuesday, September 6, 2016

Morgan: IBM Watson Creates World’s First Movie Trailer Using AI

The 20th Century Fox teamed up with IBM Research to create the world’s first cognitive movie trailer with the help of the AI bot IBM Watson. It chose 10 moments out of the horror flick Morgan and then a human editor stitched them to come up with a trailer.
The IBM Watson is getting better every day. Last time, we heard about it when it detected a rare form of leukemia in a patient’s body and when it was used to drive a bus. Now, doctor IBM Watson is preparing for a Hollywood debut. The supercomputer IBM Watson was used to create the trailer of the 20th Century Fox horror movie Morgan.
For a scary movie, an important thing is how a person digests it. “Our team was faced with the challenge of not only teaching a system to understand, “what is scary”, but then to create a trailer that would be considered “frightening and suspenseful” by a majority of viewers,” writes Michael Zimmerman for IBM.
Over 100 horror movie trailers were fed to the IBM Watson in order to give IBM Watson the “feel” of a horror movie. Though in reality, it is just some binary numbers for the AI bot.
The trailer videos were segmented into small moments on which IBM Watson performed an analysis of audio, video, and how each scene was composed. It helped Watson detect what scenes were depicting, for example, a frightened person or an eerie moment.
After watching the 90-minute Morgan, IBM Watson came up with 10 moments (6-minutes of total length) that “would be the best candidate for the trailer”.
The final trailer, however, required the help of a human as the AI-bot didn’t have editing capabilities. “Our system could select the moments, but it’s not an editor. We partnered with a resident IBM filmmaker to arrange and edit each of the moments together into a comprehensive trailer.”
An average time of ten to thirty days is required for the creation of a movie trailer. The editing team manually analyses every moment of the movie that could become a part of the trailer. The eligible candidates are then stitched together in such a way that it gives an overview of the movie. Watson’s involvement shrunk down the whole process to a matter of around 24 hours.
“Reducing the time of a process from weeks to hours –that is the true power of AI.”


The combination of machine intelligence and human expertise is a powerful one. This research investigation is simply the first of many into what we hope will be a promising area of machine and human creativity. We don’t have the only solution for this challenge, but we’re excited about pushing the possibilities of how AI can augment the expertise and creativity of individuals.
Source: IBM,fossbytes

Open Source Office Suite Apache OpenOffice Could Shut Down Soon

Apache OpenOffice, the open source office suite, is considering retirement. An email by the VP of OpenOffice has thrown light on the possible retirement of the office suite in the coming future. The project has not been able to push regular updates due to lack of volunteer developers, who have shifted to LibreOffice.


One of the major OpenOffice.org derivatives Apache OpenOffice may be packing its bags soon. The news is floating around that the open source office suite backed by the Apache Software Foundation won’t see the light of the day in the coming future. An email sent by the Apache OpenOffice VP Dennis Hamilton is serving as the wellspring of speculations regarding the retirement of the OpenOffice.
“I have regularly observed that the Apache OpenOffice project has limited capacity for sustaining the project in an energetic manner. It is also my considered opinion that there is no ready supply of developers who have the capacity, capability, and will to supplement the roughly half-dozen volunteers holding the project together. It doesn’t matter what the reasons for that might be.”
— Hamilton wrote in the email.
Hamilton has listed a roadmap of how the retirement process will continue. The source code has been put on The Attic and the external libraries are not a part of the source code. The list also includes termination of the Apache OpenOffice blogs, social media accounts, and any future official release claims won’t be related to the Apache OpenOffice.

Don’t worry, LibreOffice is here to stay

OpenOffice has been on a downward popularity track ever since anotherOpenOffice.org spin-off LibreOffice is being considered as an alternative to Microsoft Office.
The LibreOffice is being widely adopted, being a pre-installed office suite on many Linux distros. This has changed the minds of the contributing developers and many of them have started investing their efforts on the LibreOffice. The lack of contributors has disabled Apache OpenOffice project’s ability to push regular updates and bug fixes.
— Via Softpedia
If you have something to add, tell us in the comments below.


SOURCES: FOSSBYTES.COM

27-year-old Programmer Arrested For Hacking Linux Kernel Website

The man, who hacked the Linux Kernel Foundation’s website and servers in the year 2011, was arrested by the police on Monday in Miami, Florida. Donald Ryan Austin, currently out on bail, has been ordered to appear in front of the San Fransico court on September 21, 2016.

Florida-based man was booked by the police for a traffic offense in Miami. What’s so special about it? In 2011, the man named Donald Ryan Austin compromised the website kernel.org. It is a website run by the Linux Kernel Foundation for the development and distribution of the Linux Kernel. The police arrested Austin on August 28 when they came to know about his identity after stopping him.
“Austin was arrested pursuant to a four-count indictment returned by a federal grand jury in the Northern District of California on June 23, 2016, and unsealed Tuesday,” reads the US Attorney’s Office press release.
The 27-year old Austin has been indicted with gaining unauthorized access to four servers after obtaining login details of a person related to Linux Kernel Foundation. Austin utilized the opportunity to install rootkits and trojans on the servers. This allowed him to harvest the login credentials of other people associated with the organization. The sole intention of his solo hacking performance was to get access to early Linux builds.
The repair process continued for days and some Linux servers had to be shut down for a month.
Austin paid $50,000 to get the bail and he has been ordered to appear in front of the San Fransisco court on September 21. Possibly, he would have to serve a 40-year prison sentence and pay a fine of $2 million.
— Via The Register

SOURCES: FOSSBYTES.COM

How To Build Your Own VR Headset By Spending Less Than $10?

When Google open sourced its Cardboard VR designs, many companies built their variants of Cardboard. Using Google’s designs, a pair of biconvex lenses, and some cardboard, you can build your own VR headset in less than $10. This simple DIY only needs household items and a couple of other cheap materials.

urrently, there is no specific VR headset that can fulfill the needs of all people. As more VR headsets are arriving in the market, the users are getting extra choices. However, if you want a cheap headset to get acquainted with the idea of virtual reality and experience it, there are way too many options.
You might be knowing about Google Cardboard, a cheap virtual reality headset that’s made from cardboard and a pair of lenses. Since its arrival, different companies have prepared their own versions of Cardboard. You can buy them from an online store easily in $20-$30.
What if I told you that you can build your own VR headset by spending $10 or lesser. Using Google’s open source designs and grabbing cardboard sheet and lenses, you are good to go.

How To Build Your Own Google Cardboard?

Before starting to build your own version of Google Cardboard VR headset, download Google’s open source technical specifications from here. If you are good at building things and following instructions, Google’s guide would be enough for you. You can also follow a simple guide by Instructables that will make your job easier.
You simply need to take a print of the template on paper, stick it to cardboard, and cut it. Now you need to arrange and fold everything together according to the instructions.
The tools needed to complete the job are a utility knife, ruler, and scissors. Here are the materials that you need:
  • A 2’x3′ sheet of thin (2mm) cardboard. You can grab it from a shoebox or a pizza box.
  • A pair of 45mm focal length biconvex plastic lenses–either 25mm in diameter (GC 1.0) or 37mm (GC 2.0). You can grab it from Amazon or eBay.
  • Copper foil for conductive touch screen buttons.
  • A small piece of dense foam. You can get it from some electronics packaging.
  • Velcro patches that you can get from Amazon.

After getting all these things, you need just a couple of hours to assemble your own DIY VR headset. Good luck!
SOURCES: FOSSBYTES.COM

Tuesday, August 16, 2016

How To Increase RAM In Android Devices Using SD Card

We all know that Android is the brand of alteration and modifications if your android device is already rooted then this tutorial is the best to gain more knowledge relating how you can really increase your Android RAM without changing any hardware.
Just follow the below process and in the process of increasing your Android RAM, you need to understand what are the requirements to perform this tutorial.

Requirements:

  • Rooted Android Device
  • SD Card Must Be 4GB Or Higher(Class 4 or higher)
  • SD Card reader
  • Windows Computer
Follow the below process. Be sure that your SD card is formatted or blank! Follow the tutorial below.
Step1. Download and install a software called Mini Tool Partition for your Windows PC. This software will help you to do partition of your SD card, use your SD card reader to insert your SD card!

Step2. Now open Mini Tool Partition and from there just select your SD card and right click on that, and select delete(The delete button is for format)
Step3. Once your SD card formatted, right-click on that and select ‘Create“, it will create partitions, if your sd card is below 4GB then select “FAT” if higher then click on FAT32.

Step4. You can drag the Size and location, you must leave 1000MB on unallocated Space and the rest is for partition size. and Click OK.
Step5. Now you have left 1000MB unallocated space so need to get it located, again right-click on it and select Create, select Primary as the same on previous and then Ext2, not FAT32, in this you should not leave any unallocated space.Click OK done.

Step6. Now all done editing partition. Just Click Apply at the left top corner of your mini tool partition wizard.
Now move to Android device!
Step1. Download and install Link2sd from google play store on your Android.

Step2. Just open that downloaded application and it will ask for the rooted device if your device is rooted then it’s well and good or if not then you have to root your Android device. So after that, the application will ask you for the file system as .Ext partition, just select Ext2 if you had created the unallocated partition using Ext2 in the previous step, Click OK.

Step3. Prepare the application to take the partitioned space that we have taken 1000MB, and then link up all of them.

As I said at the beginning of the post, you are not adding any sort of hardware, Increasing RAM in Android means using your own SD card and approximately it will take 10-15 minutes to perform.

SOURCES: CODINGSEC.NET

All of Google’s cloud database services are now out of beta


Google is making a number of announcements around its Cloud Platform today. Most of these focus on its various cloud database services, but the company is also making a major update to its low-cost Nearline cloud storage service for cold data, making its disk volumes faster, and allowing its users to bring their own encryption keys to Cloud Storage.
The overall message Google is clearly trying to send here is that its cloud computing services are ready for production use.
On the database side, the big news is that all of Google’s cloud database services are now out of beta. That means the company’s second generation version of Cloud SQL, which allows you to easily run and manage MySQL databases in the cloud, is now generally available after about nine months in beta.
Cloud Bigtable, another NoSQL database, but with a focus on very large analytics and operational workloads, is now also generally available.


Also out of beta is the API forGoogle Cloud Datastore, Google’s NoSQL database for web and mobile app workloads. Cloud Datastore itself was already generally available for a while, but developers were only able to use it as part of Google App Engine. With the API, developers can use it for applications outside of App Engine as well. The company says Cloud Datastore, which is used by the likes of Snapchat, currently handles one trillion requests per month.
Google notes that it had added various features to these services over the course of their betas, but what will likely matter even more to its users is that these services are now backed by an SLA (for Cloud Datastore, that’s 99.95% monthly uptime, for example).
For those who want to use Microsoft’s flagship database server in the Google Cloud, the company now also offers SQL Server images with built-in licenses (currently in beta) and the ability to bring existing licenses to its platform. Running SQL Server images incurs some extra cost on top of Google’s normal instance costs, though. That’s $0.1645 per core/hour for SQL Server Standard and $0.011 per core/hour for SQL Server Web. Using SQL Server Express, though, is free.
While Microsoft may have an edge when it comes to running SQL Server in the cloud, Google knows that it needs to offer its enterprise users the option to bring their existing applications and workloads to its cloud if it wants to wean them off Microsoft’s cloud services (which, for the time being, remain significantly more popular than Google’s among enterprise customers).
As for storage, Google today announced that its low-cost Nearline storage service for “cold” data is getting much faster. Nearline competes directly with Amazon’s Glacier storage and like that service, it provides lower availability guarantees in return for significantly lower storage cost. Until now, Nearline users also had to contend with a 3 to 5 second latency when accessing data. That latency is now gone. As a Google spokesperson told me, access is now “almost real-time.”
Google’s Persistent Disk volumes are now also faster, with maximum read and write IOPS going from 15,000 to 25,000. That’s useful for both database applications and storing other types of data locally as well.
“Today marks a major milestone in our tremendous momentum and commitment to making Google Cloud Platform the best public cloud for your enterprise database workloads,” the Google team writes today. It’s not like we needed more evidence that Google is taking its Cloud Platform very seriously these days, but if you needed more evidence, now you have it.
FEATURED IMAGE: GOOGLE/GOOGLE
SOURCES: TECHCRUNCH

Indian engineering student builds a real-life walking Iron Man suit for just $750

Real-life Iron Man suit built for just $750 by this Indian student

Ever fancied getting into the iron suit of Tony Stark from the Hollywood blockbluster movie ‘Iron Man’? Well, if you didn’t, this Indian student certainly did.
Vimal Govin Manikandan, an engineering student has gone ahead and built a real-life Iron Man suit using exoskeleton technology. While it doesn’t fly and can hardly walk, Manikandan and his team developed a novel way to control a walking robot suit.

Manikandan says the suit was inspired by action movies especially the Hollywood blockbuster Avatar that featured machines designed for use by the military.
The exoskeleton made by Manikandan weighs 220 pounds, and can roughly lift 330 pounds. However, it is unclear if that includes the exoskeleton and human inside.The exoskeleton cost Manikandan just $750 (approx £578) to make, which is quite impressive. However, on the downside, as the suit weighs 220 pounds, it makes it difficult to walk or run while someone’s wearing it. Also, since it is powered by batteries, the chance that it lasts long is unlikely.
It’s not the first exoskeleton that Manikandan has built. Previously, he had made a mechanically powered Iron Man suit (see video below). Manikandan wants the military to use his technology, he told Al Jazeera.
SOURCES: TECHWORM

Tuesday, August 9, 2016

IBM’s Watson Artificial Intelligence discovered a rare illness in a woman suffering from leukaemia

Japanese Doctors Use AI To Detect Rare Leukaemia

Artificial Intelligence (AI), which is looked upon as a threat to humans, as they are rumoured to take place of humans in factories, industries, etc. in the coming years turned saviour for a patient suffering from leukaemia. Yes, you heard it right!
A team of Japanese doctors turned to IBM’s AI system, Watson for help after the treatment for an 60-year-old woman suffering from leukaemia proved unsuccessful. The AI was successfully able to find out that she actually suffered from a different, rare form of leukaemia, as the disease had gone undetected using conventional methods by the doctors.
Arinobu Tojo, a member of the medical team, told Efe news on Friday that the University of Tokyo’s Institute of Medical Science has successfully used the new method of diagnosis, which includes a computer programme capable of studying a huge volume of medical data.
Watson, which has been jointly developed by the US’ IBM and other firms, looked at the woman’s genetic information and compared it to 20 million clinical oncology studies. It later determined that the patient had an exceedingly rare form of leukaemia and recommended a different treatment which was successful.
Originally, the woman had been diagnosed with, and treated for, acute myeloid leukaemia; however, she failed to respond to the traditional treatment methods, which confounded doctors.
The conventional method of diagnosis for different types of leukaemia is based on an evaluation by a team of medical specialists after studying the genetic information of patients as well as the clinical studies available; an enormous task owing to the huge amount of data to be gone through.
Satoru Miyano, a Professor at the University of Tokyo’s Institute of Medical Science, points out that this is proof enough of the ability that AI likely has in the coming years, “to change the world.”
This is the nation’s first case of an AI saving someone’s life, emphasizing that this is “the most practical application in the field of medical and health care for artificial intelligence,” added Seiji Yamada, of the National Institute of Informatics and chairman of the Japanese Society for Artificial Intelligence.
What was remarkable was that the AI was able to diagnose the condition in just 10 minutes. Whether we would be able to see AI as a regular feature in the hospital in the coming years only time will tell.
SOURCES: TECHWORM

Microsoft won’t fix Windows flaw that lets hackers steal your username and password

The flaw, which allows a malicious website to extract user passwords, is made worse if a user is logged in with a Microsoft account.

A previously disclosed flaw in Windows can allow an attacker to steal usernames and passwords of any signed-in user — simply by tricking a user into visiting a malicious website.
But now a new proof-of-exploit shows just how easy it is to steal someone’s credentials.
The flaw is widely known, and it’s said to be almost 20 years old. It was allegedly found in 1997 by Aaron Spangler and was most recently resurfaced by researchers in 2015 at Black Hat, an annual security and hacking conference in Las Vegas.
The flaw wasn’t considered a major issue until Windows 8 began allowing users to sign into their Microsoft accounts — which links their Xbox, Hotmail and Outlook, Office, and Skype accounts, among others.
Overnight, the attack got larger in scope, and now it allows an attacker to conduct a full takeover of a Microsoft account.
Source: Zdnet
SOURCES: TECHWORM